WHAT WE DO FOR COMMERCIAL CLIENTS
Chemical grout soil stabilization is becoming very popular with deep excavation sites where the common types of soil retention such as Contiguous Piling or Shore Piling are far too expensive and there are concerns with damage to neighbouring properties from vibration.
BMC Chemical Grout Injection is Perth’s most cost effective grout injection company. We provide a cost effective solution compared to other soil stabilization underpinning methods such as Contiguous Piling, Shore Piling etc. We offer a unique advantage being there is no disruption or movement to existing fixtures and adjacent properties whilst works are being carried out. Grout can be installed below an existing structure to solidify the soil. This allows deep excavation to be carried out next to the structure without the risk of it being undermined. Adjusting the mix allows for the grout to be soft enough to carve with a small excavator or jack hammer without weakening its effectiveness.
UNDERPINNING AND SETTLEMENT
Settlement issues such as walls cracking because of soft footings and voiding under slabs are common. BMC regularly carry out underpinning and ground improvement works to secure existing failing fixtures. Installation is a simple process, either injecting directly into the soil under the existing footing or core drilling through concrete slabs and floor boards for installation access if required. Once installed the grout blocks will arrest any sinking and ensure that no further damage is caused. The building can then be monitored ensuring the technique has worked, after which the cracking walls can be repaired.
BMC are very quickly becoming Perth’s specialist Void Filling Company having just completed two major projects. One project was in the rural area, near Northam, and the other in the Perth metropolitan area. BMC was chosen because of its cost effectiveness as well as its ability to get the project done promptly and on time.
Determining the optimum and most cost effective solution requires years of experience in foundation and soil stabilisation disciplines. This includes gaining hands on experience in varying and challenging construction sites. Only then can a project be correctly evaluated to ensure the best possible outcome is achieved for our client.
When the Underpinning or Settlement needs to be that much stronger BMC have exclusively designed Shoresafe Engineering. This is where steel rods are introduced into the repair work to give extra stability and strength. This has proven very effective on some difficult construction sites.
BMC is a specialised Chemical Grout Injection company providing our clients excellence in foundation and soil stabilisation solutions, while meeting the highest safety standards in a timely and professional manner.
Simply download our engineering and design documents below.
OCCUPATIONAL HEALTH & SAFETY POLICY
“Promote and ensure a Work Safe Environment in all BMC’s Projects through continual efforts by all stakeholders”
We shall act as a team to continuously improve our Occupational Health & Safety performance – through overall commitment to comply with all applicable legal and interested parties’ requirements and prevention of work injury and ill health:
- The policy shall be understood, implemented and maintained at all levels within BMC
- The policy shall be communicated to all persons working under the control of BMC to make them aware of their individual Occupational Health & Safety obligations
- The policy shall be available to interested parties
- The policy shall be reviewed periodically to ensure it remains relevant and appropriate to BMC
“Minimize the Environmental Impact of our Company’s Operations through Legal Compliance and Effective Environmental Management”
This policy means that BMC is committed to ensure that all persons working for or on behalf of BMC:
- Comply with applicable legal and client requirements
- Control resource utilization and minimize waste / pollutants generation
- Create greater awareness of environmental issues through training and communication
“Meeting client’s requirements and continual improvement through quality management at optimum cost and to enhance client satisfaction”
This means providing quality services and products to our clients that conform to all specified requirements and relevant statutory requirements and regulations. The assurance of quality in all work processes carried out by BMC is therefore fundamental.
FREQUENTLY ASKED QUESTIONS
HOW LONG DOES IT TAKE TO COMPLETE THE GROUT INJECTION PROCESS?
On average, a thorough site inspection and quotation will be provided within two days of contacting BMC. Once the estimate has been accepted, all site work is then usually completed in less than seven days or when it is best suited for our client.
DOES GROUT INJECTION WORK IN ALL SOILS AND SITUATIONS?
No, grout injection is best suited to sandy soils. While the majority of Perth soil is sand based, there are some areas with higher clay content. Where this is the case, a site inspection will confirm what extra work will need to be carried out. Please contact BMC to arrange a comprehensive site review and recommendations.
IS SOIL STABILISATION DAMAGING TO THE WATER TABLE?
No, BMC specialises in soil stabilisation using rapid-set, microfine cement. Such cement dries very quickly to prevent any possible contamination of underground water systems.
ARE THE SOIL STABILISATION SERVICES OFFERED BY BMC QUALITY ASSURED?
BMC services are completed in accordance with strict quality standards for your protection. We adhere to the strict criteria set-out by our Engineers, as per Australian standards AS4678 and AS3600, to ensure we follow proper procedures for soil stabilisation and underpinning.
Once soil stabilisation services have been provided, you will be presented with a formal Certificate of Completion for your records and all work is insured.